|
|
|
Equipment • Information technology control unit |
|
ITP Information technology control
ITP is designed to display information about the process of drilling a well on the scales of dial indicators and numeric values. ITP has 6 arrow indicators and a graphic display, which displays the following process variables:
|
- load on the hook
- weight on bit
- discharge pressure
- torque on the rotor
- inlet flow
- outlet flow
|
There is a button "weigh" for transmitting a signal to the software station to store the current weight of the drill string.
ITP can be installed on the ground in front of the rotary driller, and in the circulation compartment. Digitization of the scales and the name of displayed parameters can be any, by the customer.
Principal parameters
interface | RS-485 |
nominal power supply (DC) | 12V |
maximum consumed power | not more then 0.85 W |
Operating temperature range | from -50°C to +50°C
| running time | unlimited |
Dimensions (height x width x depth) | 330 x 470 x 200 mm |
mass | not more then 16.5 kg |
average time to retirement | not less 6 years |
explosion-proofing marks | 0ExiaIICT6 |
Ingress protection as by GOST 14254-96 | IP66 |
|
monitoring I simulators I equipment I training |
|
|
|